PassMark BurnInTest 8.1 Build 1011 - Hallo ibu dan bapak semua, Makasih banyak sudah mau datang di blog indie tech ini. Siang ini, kami di indie tech akan menampilkan info yang menjelaskan tentang PassMark BurnInTest 8.1 Build 1011. Kami persilakan ibu dan bapak cek di bawah ini:
PassMark BurnInTest is the computer stability and reliability testing software for Windows and Linux. It is a software tool that heavily loads all the major subsystems of a computer with the aim of thoroughly exercising the hardware in a PC in a short period of time. The software tests the CPU, hard drives, RAM, CD-ROMs, CD burners, DVDs, sound cards, 2D graphics, 3D graphics, network connection, printers, video playback. If you have specialized hardware that BurnInTest does not test, you can even write your own test and integrate it with BurnInTest. PassMark has produced plugin tests for Keyboards, Dial up Modems and FireWire ports. This can all be done simultaneously as the application is multithreaded.
PassMark BurnInTest will bring intermittent or hidden problems to the surface so that after a successfully run the computer can be used with a much higher level of confidence. BurnInTest can also be used by overclockers to verify system stability at high clock speeds.
PassMark BurnInTest is a software tool that allows all the major sub-systems of a computer to be simultaneously stress tested for endurance, reliability and stability. The Professional version also has a number of additional features such as tape drive testing, USB port testing, USB 2.0 port testing, Serial and parallel port testing with the use of loop back plugs.
• Assists in PC Troubleshooting and diagnostics.
• The best value professional burn-in tool on the market!
• The hottest, fastest CPU Burn In tool around! (See our CPU Heat Generation benchmark testing)
• Avoid delivering D.O.A. (Dead on Arrival) hardware to your customers.
• Dramatically reduce your burn in times with multithreaded simultaneous testing of components.
• Build your image as a supplier of quality systems.
• Avoid costly downtime, system rebuilds and lost data.
• Test the stability of a system after configuration changes or hardware upgrades (critical for overclocking).
What BurnInTest does is thoroughly exercise the hardware in a PC in a short period of time, in the same way as normal applications use a PC over a long period of time. This takes advantage of the fact that computer hardware tends to fail either very early in its life or after many thousands of hours of use. Typically BurnInTest should be used before a PC is put into service, as the failure of a computer that isn’t being used for a critical application and doesn’t have any critical data is much less damaging, (especially if it is still under warranty).
Supported OS: Windows XP – Windows 10 (32-bit, 64-bit).
Homepage – http://passmark.com
Size: 23.1 MB
Sekian dulu, kami harap ulasan tentang PassMark BurnInTest 8.1 Build 1011 di atas bermanfaat. Terima Kasih