Epson printer L210 communication error 2000010?

First thing to check would be the connection of your printer to your computer. check if its not loose. secondly, make sure that you have installed the correct driver or might want to update it.

ennai

Hi goo day, can you try to an install the device and install it back, or before doing that try to update you driver this link might .

AnswerGuy

Check your printer connection sometimes heir may be loose cables or try turn off and on again, then try to print again. Unless your printer has a defect in connecting.

shuriken18

Hi there! I`m sorry but i don`t know what is the meaning of that numbers but if you are having a problem on your printer then try to reinstall the drivers and soft ware of it. Maybe the drivers are corrupted or damaged.

B E N

HI friend,

You might need to reinstall the driver at the same time since you just buy it and if it cant be done replace it by supplier for a new unit.

regards.

fedelis

Go to your taskbar and open event manager of epson, then click on setup network scan. After that disable then enable the activate scan network. Hope this helps.

Gen.salazar

If you are receiving communication error try to secure the usb cable connecting your printer and your compuer.

ennai

Part of your printer is showing beyond expected life.
End of service life, probably the pads.

widget

Try o setup again the printer to computer and then try to print it make sure all the plug is connected.

irishmonica

Just try to remove the paper gently or get an expert advice otherwise your printer will cause a fault.

Mateen3