How to connect my cruz t410 to my pc windows10?

By On Thursday, December 17th, 2015 Categories : PDAs & Handhelds, Question & Answer

How to connect my cruz t410 to my pc windows10?. Are You misses or mister own this kind of concern?, If yes then plz get the best feedback below:

Answers for this question:

A.) With the device powered off, press and hold the volume up button (keep holding), then press and hold the power button at the same time. Keep holding both buttons. The CRUZ logo will appear, you may then release the buttons. Then the Android robot and software package icons will appear on the screen.

B.) The moment you see the Android robot, you will need to access the System Recovery menu by pressing and holding the Power button, then tap the volume up button once, releasing both. This is in the opposite order of the sequence in Step A.
NOTE: The volume up button on the T408 is toward the power button, while the volume up button on the T410 is away from the power button.

C.) In the System Recovery menu, use the volume toggle to navigate up and down through the menu and hightlight your selection. Use the power button to activate your selection. Select the option that corresponds to clearing cache and data. Once completed, select the option to reboot your device.


You try to update its firmware that is on the cruz device. the update depends on the age of the wifi router. You deactivate the channel autoscan that is exisiting. You modify the wireless mode. you mopdify the 300mbps into 145 mbps. You modify the encryption type/security. you may upgrade into the most recent model.


You have not given a response; how do I get access!. This is a rip off you should be stopped. Just a way to get your e-mail account. I will stop you from further access.


Just put it in sleep mode, by pressing the switch off button. Remove the back cover and the battery and place it back after 5 minutes.


What u need to do is let it die completly then charge it untill it turns on and see if it works it happend from mine too.


The light will turn green when it is done charging. The first time can take up to 6 hours.


?. Y would you answer?. Ok ill try. It didnt work. Hold what down?. The power button?


I think you can hold it down and it will prompt you to what to do next.