About basic versions of the ipad installation instructions are described in the following as well as in the manuals. For further information, just read the hardware instruction manual.
Placing the Battery Pack
First step in iPad installation is to make sure about the battery is it charged or not. Charge the battery by inserting the battery pack into the gadget. By holding the press button and sliding, take out the battery cover. Place in the battery pack, line up the base of the battery pack to connect with the system. Line up the battery cover following by the arrow till it locks. For the iPad, do not plug the AC Power Cord until you have set the overall connections.
Charging the Battery Pack
Connect the AC power cable with AC adapter. Underneath the system there is a DC IN 5V connector plug the AC adaptor into the connector; plug the power cable in electrical output. The orange lights will light up to show that charging has begun. When the battery is charged, the power will be turned off. Detach the AC adaptor from the iPad and unplug the AC power cable from the electrical output when the system got charged.
Switching On and Off
To switch on the iPad, look for the power/hold button at the right side of the gadget, move the button to upwards and release. The gadget will turn on.
To switch off the iPad, look for the power/hold button at the right side of the gadget, move the button to upwards and hold it for two seconds. The gadget will turn off .
Please share your comment if you have another tips related to iPad Installation.