Paper Jam — can`t see paper in printer, terrible noise, unplugged and now resolution. Got my work day STOPPED!! Please he. this is a Brother MFC p…
Paper Jam — can`t see paper in printer, terrible noise, unplugged and now resolution. Got my work day STOPPED!! Please he. this is a Brother MFC p…. Are You mate own this kind of inquiry?, If yes then please read the best tips below:\r\n
Paper Jam — can t see paper in printer, terrible noise, unplugged and now resolution. Got my work day STOPPED!! Please he. this is a Brother MFC printer that uses L50 and L51 printer ink. THANX!!
If the printer shows the error message without any paper in the paper tray or in the pathway then open up the cover of the printer and clean the pathway, there maybe bits of obstruction lying down there and the device mistook it as a paper that got jammed when it is dirt or a peck of something that prevents the feeder from rolling.
Press the cancel button or resume to make the roller run.. pull the paper slightly while the roller rolls until you pulled the paper, in case of tearing apart just pull each piece until all is cleared, then you can use it again.
Turn of the paper and then turn it on again it that way the rollers will roll and our paper will be out or you can press/hold the resume button. you can pull the paper from the front and not from the paper tray.
The first thing to do is check for a paper jam. If there is a jam at the point the printer picks up paper from the tray this can lead to an out of paper error message.
Try to unplug your printer and if that doesnt work hold down the power button for while.
U must always check and clean the printer before use and always make sure theres enough paper in.
Unplug it and turn it on again maybe even delete and reinstall the software.
Open the cover, u will find he paper stuck inside,atleast a small piece.
Please change pickup paper sensor.
Turn off the printer and restart.